PaystubLedgerSearch
Menu
STATE PAYROLL · IA / 2026

Iowa Paycheck Calculator 2026: Take-Home Pay

Iowa’s 2026 withholding formula is built around a flat 3.8% rate applied after a standard deduction. The deduction depends on filing status, and the married default assumes spouse income is not reported. That makes the input form important: a married employee whose spouse also earns wages should not assume the same deduction applies. The available state documentation describes the difference, but this calculator does not invent a spouse-income adjustment.

The baseline below uses single status, zero IA-W-4 allowances and annual wages. At $75,000, modeled Iowa withholding is $2,356.00 and estimated take-home is $59,236.50. The calculator follows these two paragraphs. Tables use the calculator’s Iowa calculation and hold assumptions constant across salary, hourly and comparison examples.

Quick answer: A single filer earning $75,000 has estimated take-home pay of $59,236.50 a year ($2,278.33 biweekly). Run your Iowa estimate.

A flat rate still needs a taxable wage base

Iowa’s withholding formula applies 3.8% after subtracting a standard deduction. The calculator uses $13,000 for a single filer and $26,000 for a married filer under the documented default in which spouse income is not reported. Because the rate applies after the deduction, multiplying gross wages by 3.8% overstates the state amount in the modeled examples. At $75,000, the calculator returns $2,356.00 of Iowa withholding rather than the gross-times-rate shortcut.

The deduction shelters a fixed amount of wages before the rate is applied. At a lower salary, that deduction represents a larger share of gross income; as salary rises, a greater portion remains taxable. This causes the effective state rate to increase toward the flat 3.8% rate, even though the statutory withholding rate itself does not step through multiple brackets in this model. Effective rate and flat rate answer different questions.

Iowa state income tax is one component of take-home. Federal income tax, Social Security and Medicare are modeled separately. The state-tax table isolates Iowa’s own amount, while total effective tax combines the included tax deductions. If the state line on a stub looks correct but the deposit differs, review federal withholding and employee deductions before attributing the difference to Iowa.

Run your Iowa numbers

INTERACTIVE LEDGER

Enter your pay

Based on 2026 rules, the standard deduction and one job. Values update as you type.

Your pay ledger

ANNUAL ESTIMATE · 2026

PAYSTUB
№ IA-2026
Line itemAnnual amount
Gross wages$75,000.00
Federal income tax− $7,670.00
Social Security− $4,650.00
Medicare− $1,087.50
Iowa income tax− $2,356.00
Estimated net pay$59,236.50
Per paycheck · biweekly$2,278.33
Estimated deductions21.0%

26 pay periods per year. Paycheck withholding, benefits, credits, local taxes and individual circumstances can change your actual deposit. Read the method.

The married default makes a specific assumption

The Iowa withholding source specifies a $26,000 deduction for a married employee when spouse income is not reported. This page uses that documented default for a married baseline. It does not mean every married household has only one wage earner; it means the calculation needs a stated assumption when spouse income is absent from the input. The single scenario uses the calculator’s $13,000 deduction.

If a spouse also works, Iowa’s formula changes the withholding treatment. The available materials identify that spouse income matters, but this site does not provide enough supported detail to insert an alternative dollar adjustment into this article. For that reason, the married example here is explicitly limited to the no-spouse-income default. Readers with a working spouse should consult the Iowa Department of Revenue instructions and complete the applicable withholding certificate rather than use this figure as a personalized result.

This is not a prediction of a household’s final tax liability. Withholding is a payment schedule, and each employer has information from its own employee forms. Two spouses’ employers may not automatically coordinate their payroll calculations. The site’s married figure demonstrates the state model’s stated default; it should not be read as proof that the same amount is suitable for every household with two incomes.

Seven salaries show how the deduction changes the effective rate

The table covers $30,000, $45,000, $60,000, $75,000, $100,000, $150,000 and $250,000. For each wage, it reports Iowa tax, the state effective rate, total effective tax and the next-$10,000 change. All values come from the paycheck calculator. The comparison makes the fixed deduction visible: lower wages have less income exposed to 3.8%, while higher salaries spread the same deduction across a larger total.

The state effective rate divides Iowa withholding by gross wages. It is not a substitute for the 3.8% rate used on the taxable base. The marginal column reports the dollar change in Iowa withholding associated with another $10,000 of salary and converts that change to a rate. Because the modeled rate is flat once the deduction is accounted for, this increment is easier to interpret than a bracket schedule, but it still reflects the exact calculator result at both salary points.

The total effective-tax column contains federal and payroll taxes as well as Iowa tax. It helps describe the modeled reduction from gross pay, but it cannot be called an Iowa rate. That distinction matters when comparing an offer in Iowa with Illinois, Minnesota, Wisconsin or Missouri. Each state’s own calculator calculates its state line; all use a common federal baseline for the displayed take-home comparison.

IA calculator outputs for a single filer; annual wages and biweekly equivalent
Annual salaryState income taxState effective rateTotal effective taxState marginal rate on next $10,000Added state tax per next $10,000
$30,000.00$646.002.15%14.54%3.80%$380.00
$45,000.00$1,216.002.70%17.51%3.80%$380.00
$60,000.00$1,786.002.98%18.99%3.80%$380.00
$75,000.00$2,356.003.14%21.02%3.80%$380.00
$100,000.00$3,306.003.31%24.13%3.80%$380.00
$150,000.00$5,206.003.47%27.61%3.80%$380.00
$250,000.00$9,006.003.60%30.33%3.80%$380.00

Every amount is calculated by the paycheck calculator on this page. The last column is the change in modeled state income tax when gross salary rises by $10,000 from that row.

Iowa in a four-state pay comparison

The comparison table uses Illinois, Minnesota, Wisconsin and Missouri at $60,000, $100,000 and $150,000. These neighboring states have different withholding designs. Illinois uses a flat income-tax structure; Minnesota and Wisconsin use graduated schedules and their own deductions; Missouri has a separate state formula. Every displayed net is calculated with the corresponding supported state calculator, holding salary and filing assumptions steady.

The annual difference is the Iowa net amount minus the other state’s amount. A positive value means the Iowa estimate leaves more modeled take-home at the displayed salary; a negative value favors the comparison state on this limited measure. The biweekly difference translates annual results into an approximate 26-check year. It does not account for the fact that state-specific forms or local obligations could vary between employees.

A wage-tax comparison is not a relocation budget. Home prices, rent, property and sales taxes, health coverage, commuting, retirement matching and local costs can outweigh a withholding difference. It also does not determine the final return. Use these figures to compare the site’s state wage models, then bring in the details of an actual job and household. The salary table is especially useful for tracing Iowa’s deduction separately from the broader net figure.

Annual net-pay comparison: IA and selected relocation alternatives
SalaryCompared stateIA netOther state netAnnual differenceBiweekly difference
$60,000.00IL$48,604.00$47,564.79+$1,039.21+$39.96
$60,000.00MN$48,604.00$47,569.39+$1,034.61+$39.79
$60,000.00WI$48,604.00$47,604.21+$999.79+$38.45
$60,000.00MO$48,604.00$48,507.33+$96.67+$3.71
$100,000.00IL$75,874.00$74,374.79+$1,499.21+$57.66
$100,000.00MN$75,874.00$73,463.39+$2,410.61+$92.71
$100,000.00WI$75,874.00$74,187.52+$1,686.48+$64.86
$100,000.00MO$75,874.00$75,417.33+$456.67+$17.56
$150,000.00IL$108,585.00$106,510.79+$2,074.21+$79.78
$150,000.00MN$108,585.00$104,189.06+$4,395.94+$169.08
$150,000.00WI$108,585.00$106,148.52+$2,436.48+$93.71
$150,000.00MO$108,585.00$107,678.33+$906.67+$34.88

Positive differences mean the displayed state leaves more modeled take-home pay at the same gross salary. All rows use single filing status and 26 checks.

Hourly work uses an annualized Iowa schedule

The hourly examples use $15, $20, $30 and $45 per hour, assuming 40 paid hours every week for 52 weeks. This creates a gross annual salary before the Iowa deduction and 3.8% rate are calculated. A $20 hourly wage corresponds to $41,600.00 a year under that schedule. The table shows state tax and take-home on the annualized result rather than attempting to estimate one exact paycheck.

Changing hours changes the annual wage base and can change the share of gross pay sheltered by the fixed deduction. A worker with unpaid weeks, seasonal work or a midyear start should not assume the table’s full-year gross applies. Overtime or bonuses raise compensation, but the annual examples do not identify when a bonus is paid or what amount an employer will withhold from one check.

The hourly result is divided into annual and biweekly equivalents to make offer comparisons easier. A real weekly check has a different gross amount and may be withheld using period-specific tables and rounding. Benefits, retirement contributions and other employee choices also affect the deposit. For a useful comparison, keep hours, period, filing setup and spouse-income assumption consistent between the calculator and pay statement.

Hourly scenarios in IA, assuming 40 hours for 52 weeks
Hourly rateAnnual grossState taxState payroll programAnnual take-homeBiweekly take-home
$15.00$31,200.00$691.60$0.00$26,557.60$1,021.45
$20.00$41,600.00$1,086.80$0.00$34,518.80$1,327.65
$30.00$62,400.00$1,877.20$0.00$50,441.20$1,940.05
$45.00$93,600.00$3,062.80$0.00$71,614.80$2,754.42

Hourly rows use a steady full-year schedule; overtime, unpaid weeks and benefits are not included.

The absence of a local payroll line in this model

The Iowa state estimate contains income-tax withholding and the federal and FICA amounts represented by the paycheck calculator. The state definition does not add a separate local wage-tax deduction, so the calculator shows no Iowa local payroll tax. That statement describes this model’s covered state withholding lines; it does not mean a worker has no local costs or that an employer cannot list other deductions.

Health insurance, dental coverage, retirement savings, flexible spending, garnishments, union dues and other workplace items are outside the calculation. They may change the amount deposited without changing Iowa tax. A pay stub can also show employer contributions that are not employee deductions. Read labels carefully before comparing the total deduction amount with an estimate that only includes modeled taxes.

If the Iowa state line differs, check annual wages, filing status, whether a married spouse-income assumption applies and the IA-W-4 allowances. If the state amount is close but net pay is not, compare federal tax and non-tax payroll lines. This separation helps locate the source of a mismatch instead of treating all deductions as one Iowa calculation.

The $40,000 to $150,000 examples answer different questions

At $40,000 and $60,000, the $13,000 single deduction removes a substantial share of gross wages before the rate is applied. At $100,000 and $150,000, the same fixed amount is a smaller fraction of salary. The tax and net figures for all four points are calculated by the calculator and can be viewed in the broader salary results, which also add $30,000, $45,000, $75,000 and $250,000 to show the curve.

This is why a flat rate does not produce a flat effective percentage across pay levels. The nominal rate is 3.8%, but the amount is assessed after the deduction. As the wage grows, effective Iowa withholding moves closer to the rate applied to taxable wages. A reader should not compare gross multiplied by 3.8% with the model and assume the difference indicates a calculator error.

For married filing status, the deduction in the baseline is $26,000 only under the documented assumption that spouse income is not reported. The four salary examples in the default article use single status, so they are not a substitute for the married calculation. Switch filing status in the tool to see the calculator’s supported married case, and refer to Iowa’s certificate instructions if the spouse also has earnings.

Common mistakes when reading Iowa withholding

The first mistake is to multiply total gross pay by 3.8% and expect that amount to appear as Iowa tax. The deduction is applied first, so the base is smaller. Another mistake is to treat the $26,000 married deduction as universal, even when spouse income is relevant. The model labels its married default because the source distinguishes employees who report spouse income from those who do not.

A third mistake is to compare annual tax with one check’s deduction. Employers allocate annual withholding across pay periods, and a bonus or irregular schedule can make one check look different from the steady annual average. A fourth is to assume the take-home number includes benefits. It does not. Those costs are specific to the employer and plan, and they can be larger than the state-tax difference between two salary examples.

The best cross-check starts with the same filing status and annual wages, then compares the Iowa line and year-to-date amounts. Next, verify the federal withholding and FICA lines. Only after that should the remaining difference be attributed to benefits or other payroll choices. The state table and official Iowa formula link make the tax component traceable without suggesting the net deposit is guaranteed.

Use the Iowa estimate with its assumptions in view

For this page, the state facts are narrow and concrete: Iowa uses a 3.8% rate after the status-based deduction, single status has a $13,000 deduction, and the married default uses $26,000 when spouse income is not reported. Zero IA-W-4 allowances form the baseline. The model gives $2,356.00 of state withholding and $59,236.50 in take-home at $75,000.

When reviewing an offer, enter the expected salary and pay frequency, then compare the same inputs across states. Keep the married-spouse assumption explicit. Add employer benefits, retirement match and local living expenses separately because they are not state wage withholding. This avoids treating a controlled calculator result as a complete household budget.

The Iowa Department of Revenue formula is the source for the 2026 rate and withholding method. This article describes the behavior stored in the site’s calculator and names the assumptions it uses. Where the supported source does not provide a spouse-income number suitable for a hand calculation, this page does not supply one. The official certificate and publication are the right place to resolve that case.

Iowa take-home by salary and hourly rate

SINGLE FILER · 2026

Salary and hourly examples use the same state model. Hourly figures assume 40 hours a week for 52 weeks.

Annual salary take-home
Annual salaryAnnual netBiweeklyWeekly
$30,000.00$25,639.00$986.12$493.06
$40,000.00$33,294.00$1,280.54$640.27
$50,000.00$40,949.00$1,574.96$787.48
$60,000.00$48,604.00$1,869.38$934.69
$75,000.00$59,236.50$2,278.33$1,139.16
$100,000.00$75,874.00$2,918.23$1,459.12
Hourly pay take-home
HourlyAnnual grossAnnual netBiweeklyWeekly
$15.00$31,200.00$26,557.60$1,021.45$510.72
$20.00$41,600.00$34,518.80$1,327.65$663.82
$25.00$52,000.00$42,480.00$1,633.85$816.92
$30.00$62,400.00$50,441.20$1,940.05$970.02
$40.00$83,200.00$64,693.60$2,488.22$1,244.11

Try the hourly paycheck calculator for a different work schedule.

Iowa paycheck questions

What is Iowa take-home pay on $75,000?

For the single filer baseline, the calculator estimates $59,236.50 in annual take-home and $2,356.00 in Iowa withholding.

What Iowa withholding rate is used in 2026?

The model applies a flat 3.8% rate after subtracting the status-based deduction.

What deduction does the calculator use for a single filer?

The Iowa calculator uses a $13,000 annual deduction for the single-filer baseline.

How does Iowa treat a married employee whose spouse works?

Spouse income changes the withholding formula. This page uses the documented $26,000 default only when spouse income is not reported; consult Iowa’s instructions for a working-spouse case.

Does Iowa add a local wage tax?

No separate local payroll tax is included in this state model. Employer benefits and other deductions may still appear on a stub.

How much is $20 an hour after Iowa taxes?

At 40 hours for 52 weeks, $20 per hour is $41,600.00 annual gross; the hourly table calculates the modeled Iowa tax and net.

Why is Iowa tax less than 3.8% of gross wages?

The 3.8% rate applies after the standard deduction, so gross wages and the taxable base are different.

What does the Iowa estimate exclude?

Insurance, retirement contributions, garnishments and other employer-specific deductions are not included.

Sources

These are annualized estimates, not a pay stub or tax advice. Actual withholding can differ with payroll forms, benefits and year-to-date wages. See the site disclaimer.

Yassin

Yassin is a software developer who built PaystubLedger. As its editor, he checks each model against its linked source.

About Yassin

Keep reading