PaystubLedgerSearch
Menu
STATE PAYROLL · GA / 2026

Georgia Paycheck Calculator 2026: Take-Home Pay

Georgia’s 2026 paycheck calculation uses one state income-tax rate and a standard deduction that reduces the wages exposed to that rate. That makes the basic formula easier to describe than a graduated schedule, but it does not mean the rate should be multiplied by gross salary. The deduction changes the effective share of pay that reaches the state tax line.

The table and examples here use the same single-filer assumptions and calculation as the interactive calculator. They focus on Georgia income tax, the federal and FICA amounts that still apply, and the transition from the prior withholding rate during 2026. Local living costs and benefit deductions remain separate from this state-pay estimate.

Quick answer: A single filer earning $75,000 has estimated take-home pay of $58,598.50 a year ($2,253.79 biweekly). Run your Georgia estimate.

The deduction changes the base before Georgia’s flat rate

The state model stores Georgia as a flat tax at 4.99%, with a $15,000 standard deduction for a single filer and $30,000 for joint filing. For a single filer, the calculator first subtracts the standard deduction from gross wages and then applies the rate to the remaining amount. A $30,000 salary therefore begins with a $15,000 state-tax base. At $75,000, the modeled base is $60,000 and the state line is $2,994.00. The formula is straightforward, but the distinction between gross and taxable wages is essential.

At $75,000 the full paycheck calculation separately estimates $7,670.00 in federal income tax, $4,650.00 in Social Security and $1,087.50 in Medicare. The modeled Georgia amount then contributes to the total deductions, leaving annual take-home of $58,598.50 or $2,253.79 every two weeks. Those lines answer different questions: the flat state rate applies after the Georgia deduction, while FICA follows federal payroll rules and federal income tax uses its own standard deduction and brackets.

The standard deduction causes the effective Georgia rate to rise toward 4.99% as salary increases. Once wages exceed the deduction, another dollar is taxed at the flat state rate in this model. The effective percentage at a particular salary is state tax divided by gross salary, not the marginal percentage on the next taxable dollar. The table provides both measures, plus the actual extra Georgia tax associated with another $10,000 of gross wages.

Run your Georgia numbers

INTERACTIVE LEDGER

Enter your pay

Based on 2026 rules, the standard deduction and one job. Values update as you type.

Your pay ledger

ANNUAL ESTIMATE · 2026

PAYSTUB
№ GA-2026
Line itemAnnual amount
Gross wages$75,000.00
Federal income tax− $7,670.00
Social Security− $4,650.00
Medicare− $1,087.50
Georgia income tax− $2,994.00
Estimated net pay$58,598.50
Per paycheck · biweekly$2,253.79
Estimated deductions21.9%

26 pay periods per year. Paycheck withholding, benefits, credits, local taxes and individual circumstances can change your actual deposit. Read the method.

The 2026 withholding change can leave two rates on one year of checks

Georgia’s employer guide describes a rate change from 5.19% to 4.99% for 2026. The state records show that employers could begin using 4.99% on May 11, 2026; withholding before the change could therefore reflect the earlier rate. A calculator applying the 2026 rate to a full-year wage is estimating a final-year baseline, not replaying every state amount already taken from January paychecks.

That timing can make a current stub look different from a simple annual estimate even when the employer used the rate available at the time. A worker who received checks under both rates should compare year-to-date Georgia withholding with year-to-date state wages and the dates each rate was used. The rate difference applies to the taxable base after the deduction, so multiplying gross wages by the difference between 5.19% and 4.99% will overstate the effect.

At filing, the annual state calculation reconciles taxable wages and payments already made. If the employer withheld at the earlier percentage for part of the year, the total withheld can exceed what the current full-year estimate implies. That excess does not make the tax formula different; it reflects timing in the payments. The official guide linked below is the source for the employer transition, while the calculator gives a consistent way to compare salary scenarios.

Seven salary points show the effective and marginal amounts

The state-tax table runs from $30,000 to $250,000 rather than showing only the common midrange example. At $30,000, the standard deduction removes half the gross wage from the state base. At $60,000, $45,000 remains exposed to the rate. At $100,000, the base is $85,000, and at $150,000 it is $135,000. Each tax amount is produced by the paycheck calculator, so it follows the same filed state definition used by the live calculator.

The state effective rate is smaller than 4.99% at these wages because the deduction remains a fixed amount while salary grows. The marginal rate is different: after the deduction is exhausted, each additional taxable dollar is exposed to the flat 4.99% rate under the model. The last column expresses that behavior in dollars by comparing the state result at the listed salary with the result after another $10,000.

Total effective tax includes the other modeled deductions as well as Georgia tax. It should not be read as a Georgia rate. For example, a federal bracket can change while the Georgia formula remains flat. A worker comparing an offer should look at the state effective column to isolate Georgia, then use the total effective column to see the entire modeled tax burden. Health insurance and retirement elections are not included in either number.

GA calculator outputs for a single filer; annual wages and biweekly equivalent
Annual salaryState income taxState effective rateTotal effective taxState marginal rate on next $10,000Added state tax per next $10,000
$30,000.00$748.502.50%14.88%4.99%$499.00
$45,000.00$1,497.003.33%18.13%4.99%$499.00
$60,000.00$2,245.503.74%19.76%4.99%$499.00
$75,000.00$2,994.003.99%21.87%4.99%$499.00
$100,000.00$4,241.504.24%25.06%4.99%$499.00
$150,000.00$6,736.504.49%28.63%4.99%$499.00
$250,000.00$11,726.504.69%31.42%4.99%$499.00

Every amount is calculated by the paycheck calculator on this page. The last column is the change in modeled state income tax when gross salary rises by $10,000 from that row.

Neighboring states answer different relocation questions

The comparison table uses North Carolina, South Carolina, Florida and Tennessee as distinct alternatives for people considering a southeastern move. At each salary, it compares net pay for identical filing status and pay frequency. North Carolina has a flat tax and its own standard deduction; South Carolina uses a progressive schedule; Florida and Tennessee do not tax wages in this model. The rows are calculated state by state instead of applying Georgia’s formula to another state.

The annual difference is the subject state’s net amount minus the alternative’s. A positive number means the Georgia model leaves more after its included taxes; a negative figure means the comparison state has the higher estimated net pay. Biweekly difference divides the annual result across 26 checks, which lets an employee relate an offer comparison to payday without confusing it with monthly cash flow.

These rows are not cost-of-living comparisons. Housing, property tax, sales tax, insurance, commuting and local levies can change the household budget, and this calculator does not model every local charge. Use the table to answer a narrower question: how do the supported paycheck tax models differ when gross salary and filing assumptions are held constant? Then add location-specific spending and benefits from the actual offer.

Annual net-pay comparison: GA and selected relocation alternatives
SalaryCompared stateGA netOther state netAnnual differenceBiweekly difference
$60,000.00NC$48,144.50$48,504.72−$360.22−$13.86
$60,000.00SC$48,144.50$49,068.81−$924.31−$35.55
$60,000.00FL$48,144.50$50,390.00−$2,245.50−$86.37
$60,000.00TN$48,144.50$50,390.00−$2,245.50−$86.37
$100,000.00NC$74,938.50$75,698.73−$760.23−$29.24
$100,000.00SC$74,938.50$75,774.81−$836.31−$32.17
$100,000.00FL$74,938.50$79,180.00−$4,241.50−$163.13
$100,000.00TN$74,938.50$79,180.00−$4,241.50−$163.13
$150,000.00NC$107,054.50$108,314.72−$1,260.22−$48.47
$150,000.00SC$107,054.50$107,780.81−$726.31−$27.94
$150,000.00FL$107,054.50$113,791.00−$6,736.50−$259.10
$150,000.00TN$107,054.50$113,791.00−$6,736.50−$259.10

Positive differences mean the displayed state leaves more modeled take-home pay at the same gross salary. All rows use single filing status and 26 checks.

Hourly pay uses the same deduction after annualization

The hourly table assumes a steady 40-hour week for 52 weeks. At $15, $20, $30 and $45 per hour, it converts the rate to annual gross pay before applying the federal and Georgia calculations. This order matters: the state deduction is annual, so a worker’s hours determine how much of the deduction is used in the modeled year. A part-time employee may have a larger effective deduction as a share of wages than a full-time worker.

A $20 hourly rate at the table schedule means $41,600.00 in annual gross wages. The Georgia tax line is the calculator result at that salary; it is not the 4.99% rate multiplied by the hourly figure. A raise in hourly pay changes the full-year gross amount and can alter the ratio of state tax to gross, even though the state marginal rate above the deduction remains the same in this model.

For variable shifts, enter the expected weekly hours in the calculator instead of treating the table as a forecast. Unpaid weeks reduce annual gross; a bonus adds wages and can alter federal withholding. Neither a shift premium nor a benefit election is inferred from the hourly wage alone. The table gives a clean full-year comparison, while the tool recalculates the annual estimate when the schedule changes.

Hourly scenarios in GA, assuming 40 hours for 52 weeks
Hourly rateAnnual grossState taxState payroll programAnnual take-homeBiweekly take-home
$15.00$31,200.00$808.38$0.00$26,440.82$1,016.95
$20.00$41,600.00$1,327.34$0.00$34,278.26$1,318.39
$30.00$62,400.00$2,365.26$0.00$49,953.14$1,921.27
$45.00$93,600.00$3,922.14$0.00$70,755.46$2,721.36

Hourly rows use a steady full-year schedule; overtime, unpaid weeks and benefits are not included.

Georgia’s flat structure does not make every withholding line flat

A Georgia employee may see federal income tax, Social Security, Medicare and a Georgia state line. In this calculator, Georgia has no separate employee-paid program under otherPayroll, so the state-specific amount in the table is income tax alone. An employer’s benefits, retirement plan, garnishment or other voluntary deduction can still appear on the statement; those items are not Georgia income tax and are outside these calculations.

The shape of the Georgia line is easier to recognize when the state deduction and taxable wages are visible. If the state line is close but the net deposit is not, compare non-tax deductions before questioning the state rate. If the state line itself differs, check the state form on file and whether the payment occurred before or after the May 2026 rate transition. The employer guide and year-to-date totals are more useful than a gross-pay percentage guessed from one check.

A new job can also bring a different pay interval. Weekly, biweekly and semimonthly checks do not have the same amount even when annual salary is identical. This page’s examples assume biweekly payment when presenting paycheck equivalents. Keep the period consistent before comparing the printed amount with an offer letter or another calculator; annual pay and per-check pay are not interchangeable without the number of checks.

Use the figures as a Georgia-specific cross-check

A good comparison starts with gross salary and filing status, then checks the taxable base after the $15,000 or $30,000 standard deduction. Next, compare state withholding and the year-to-date amount. Finally, add federal tax and FICA to understand the full modeled net. This order avoids attributing a federal withholding change to Georgia or counting the state deduction twice.

At $100,000, the state tax figure in the table comes from the calculator, as do the modeled net amounts in every comparison row. A difference between your employer’s check and the estimate can come from an earlier rate, pay-period rounding, an incomplete year at the new salary or employee-specific forms. The calculator does not know which of those conditions applies unless it is represented by an input.

For state-specific legal details, use the Georgia Department of Revenue materials linked on this page. This article explains the behavior built into the site model and identifies the published 2026 transition; it does not replace the employer guide or an individual return. The most useful output is a reproducible estimate whose state tax, total deductions and pay frequency can be compared with the corresponding entries on a Georgia pay stub.

The calendar-year total can combine two Georgia withholding rates

A worker employed throughout 2026 may have checks from both sides of the state’s rate transition. The calculator uses the 4.99% state rule for its full-year salary scenario. The employer guide says 4.99% could be used beginning May 11, while earlier withholding could reflect 5.19%. Consequently, a current check can look closer to the new rate even though the year-to-date state total still includes payments calculated under the earlier one.

Do not estimate the difference by applying either percentage directly to total gross wages. Georgia first applies the standard deduction, and withholding is distributed across pay dates. Instead, compare year-to-date Georgia taxable wages with the state withheld so far, and note the pay date when the employer changed its rate. A worker who started after the switch has a different history from a worker with January paychecks, even at the same annual salary.

The purpose of the salary table is to show the model’s current-year baseline, not to forecast a refund. A return depends on the complete annual tax calculation and payments made during the year. The source link lets the reader verify the employer transition. For an individual discrepancy, the employer’s withholding record and the state form on file are the facts needed to understand why a particular check differs from the modeled state line.

Georgia take-home by salary and hourly rate

SINGLE FILER · 2026

Salary and hourly examples use the same state model. Hourly figures assume 40 hours a week for 52 weeks.

Annual salary take-home
Annual salaryAnnual netBiweeklyWeekly
$30,000.00$25,536.50$982.17$491.09
$40,000.00$33,072.50$1,272.02$636.01
$50,000.00$40,608.50$1,561.87$780.93
$60,000.00$48,144.50$1,851.71$925.86
$75,000.00$58,598.50$2,253.79$1,126.89
$100,000.00$74,938.50$2,882.25$1,441.13
Hourly pay take-home
HourlyAnnual grossAnnual netBiweeklyWeekly
$15.00$31,200.00$26,440.82$1,016.95$508.48
$20.00$41,600.00$34,278.26$1,318.39$659.20
$25.00$52,000.00$42,115.70$1,619.83$809.92
$30.00$62,400.00$49,953.14$1,921.27$960.64
$40.00$83,200.00$63,958.02$2,459.92$1,229.96

Try the hourly paycheck calculator for a different work schedule.

Georgia paycheck questions

How does Georgia calculate state tax on $75,000?

The model subtracts the $15,000 single standard deduction and applies 4.99% to the remaining $60,000, producing $2,994.00 of modeled state income tax.

Why is the effective Georgia rate below 4.99%?

The $15,000 single deduction is a fixed part of gross wages. Effective rate divides the tax after that deduction by the full salary.

Why could my early 2026 Georgia withholding use 5.19%?

The state employer guide records the 4.99% rate transition and says employers could use it beginning May 11, 2026. Earlier checks may reflect the prior rate.

Does Georgia have a separate payroll program deduction?

The Georgia state model has no employee-paid item in otherPayroll. Federal FICA still applies, and benefits or employer deductions may appear separately.

What is Georgia take-home on $100,000?

The salary table calculates the Georgia state tax, total effective rate and take-home from the calculator at $100,000 for a single filer.

How much is $20 an hour after taxes in Georgia?

At 40 hours for 52 weeks, $20 an hour produces $41,600.00 gross in the table. The state and take-home amounts are calculated for that annual salary.

Does Georgia tax the full gross salary at 4.99%?

No. The model applies the rate after the standard deduction: $15,000 for a single filer or $30,000 for joint filing.

Sources

These are annualized estimates, not a pay stub or tax advice. Actual withholding can differ with payroll forms, benefits and year-to-date wages. See the site disclaimer.

Yassin

Yassin is a software developer who built PaystubLedger. As its editor, he checks each model against its linked source.

About Yassin

Keep reading