PaystubLedgerSearch
Menu
STATE PAYROLL · CO / 2026

Colorado Paycheck Calculator 2026: Take-Home + FAMLI

Colorado pay has two modeled state-related lines: income tax estimated from the Department of Revenue withholding worksheet and an employee contribution for Family and Medical Leave Insurance. The worksheet applies the 2026 flat rate after its default allowance. FAMLI is calculated separately against covered wages, so the combined state effect cannot be represented accurately as one percentage of gross pay.

The examples use a single filer and a steady full-year salary. They expose the state tax, the payroll-program amount and overall take-home at several salaries. Denver and some other local occupational privilege taxes are outside this calculator; anyone working in those places should check the local line as well as the state and FAMLI amounts.

Quick answer: A single filer earning $75,000 has estimated take-home pay of $58,204.50 a year ($2,238.63 biweekly). Run your Colorado estimate.

DR 1098 gives Colorado a flat calculation with an allowance

The Colorado model follows the 2026 Department of Revenue employee withholding worksheet, DR 1098. For a single filer it subtracts the default $5,500 allowance and applies a flat 4.40% rate to the remaining wage amount. This is not exactly the same as multiplying 4.40% by gross salary. At $75,000, the state line calculated by the calculator is $3,058.00. Joint filers use a different default amount, which is why the page’s single-filer examples should not be copied to a household with another filing status.

The estimate also includes Colorado FAMLI in a separate line. On $75,000, the calculator calculates $330.00 of employee contribution under its 0.44% rule. The state income tax, federal income tax, Social Security and Medicare all remain separately identifiable. At this salary, federal withholding is $7,670.00, Social Security is $4,650.00, and Medicare is $1,087.50; the complete model leaves $58,204.50 a year or $2,238.63 every two weeks.

DR 1098 is a withholding worksheet, so an employee’s chosen allowances or payroll information can differ from the default used here. The table reports the state tax result at seven annual salaries and labels an effective state percentage separately from total effective tax. Colorado’s marginal state rate is flat in the modeled taxable range, while its effective rate reflects the allowance. FAMLI has a wage limit and follows a different base, so it should not be merged into either rate column.

Run your Colorado numbers

INTERACTIVE LEDGER

Enter your pay

Based on 2026 rules, the standard deduction and one job. Values update as you type.

Your pay ledger

ANNUAL ESTIMATE · 2026

PAYSTUB
№ CO-2026
Line itemAnnual amount
Gross wages$75,000.00
Federal income tax− $7,670.00
Social Security− $4,650.00
Medicare− $1,087.50
Colorado income tax− $3,058.00
Colorado FAMLI− $330.00
Estimated net pay$58,204.50
Per paycheck · biweekly$2,238.63
Estimated deductions22.4%

26 pay periods per year. Paycheck withholding, benefits, credits, local taxes and individual circumstances can change your actual deposit. Read the method.

The $5,500 allowance changes the first salary comparisons

For an annual wage below the single-filer allowance, the worksheet base cannot fall below zero. Above it, the model’s state income tax grows at 4.40% on the additional taxable amount. That produces an easy cross-check: take gross annual wages, subtract $5,500, and apply the rate, subject to the calculator’s rounding. At $30,000, $45,000 and $60,000, the fixed allowance is a progressively smaller share of gross pay. By $150,000, it changes the effective rate less than it does for an hourly worker near the allowance.

The table’s “added state tax” column answers a concrete raise question. It compares state tax at a salary with the state result after $10,000 more gross wages. In the flat-rate region, the increase should reflect the rate applied to that added taxable pay; the allowance remains unchanged. Total effective tax will be higher because federal income tax and FICA are included in that column. Neither rate tells you what a local Denver charge or an employee benefit will do to a deposit.

This distinction also matters when comparing job offers. A 4.40% headline rate is not the effective share of gross wages paid to Colorado, and it says nothing about FAMLI. The state effective column isolates state income tax. The overall effective column counts all modeled deductions. Use them together to understand why an employee’s total modeled burden changes as wages rise without treating the state rate as the whole paycheck story.

CO calculator outputs for a single filer; annual wages and biweekly equivalent
Annual salaryState income taxState effective rateTotal effective taxState marginal rate on next $10,000Added state tax per next $10,000
$30,000.00$1,078.003.59%16.42%4.40%$440.00
$45,000.00$1,738.003.86%19.11%4.40%$440.00
$60,000.00$2,398.004.00%20.45%4.40%$440.00
$75,000.00$3,058.004.08%22.39%4.40%$440.00
$100,000.00$4,158.004.16%25.42%4.40%$440.00
$150,000.00$6,358.004.24%28.82%4.40%$440.00
$250,000.00$10,758.004.30%31.36%4.40%$440.00

Every amount is calculated by the paycheck calculator on this page. The last column is the change in modeled state income tax when gross salary rises by $10,000 from that row.

Gross pay$75,000Federal income tax−$7,670.00Social Security−$4,650.00Medicare−$1,087.50Colorado income tax−$3,058.00Colorado FAMLI−$330.00Take-home pay$58,204.50
Where a $75,000 salary goes, single filer in Colorado, 2026 (annualized estimate). Figures come from the same calculations as the calculators on this site.

FAMLI reaches its wage ceiling at the Social Security base

Colorado FAMLI is stored in the state model as an employee contribution of 0.44% up to the federal Social Security wage base. A worker below the modeled $184,500.00 ceiling sees the contribution rise with covered wages; after wages reach the cap, the contribution no longer grows with additional salary. At the ceiling, the calculator calculates a maximum annual employee amount of $811.80. The table and calculator therefore do not apply the percentage above the wage limit.

The cap changes the relationship between gross pay and the FAMLI line. At $75,000, the model shows $330.00. At $150,000 it continues to grow with wages. At $250,000, the contribution remains at its capped level, although state income tax and federal income tax continue to respond to the larger salary. That is why the total effective percentage can shift even though the FAMLI rate itself has not changed.

When checking a Colorado stub, identify the FAMLI label and compare the year-to-date contribution with year-to-date covered wages. A midyear start or a salary increase means the worker may reach the ceiling at a different check than a full-year example suggests. The employer also pays a separate share under program rules, but this calculator reports the employee-side amount only. Do not add an employer contribution to the worker’s payroll deductions.

A Denver work location can add a local payroll item

Colorado’s state calculation does not settle every location-based deduction. Denver and some other municipalities have occupational privilege taxes, often described as a local head tax. This page excludes those amounts because the applicable charge depends on the work location and is not modeled in the state calculator. A Denver worker can therefore have a correctly calculated Colorado state line and still receive a smaller deposit than the example suggests.

When a local item appears, keep it separate from the 4.40% state income tax and the FAMLI premium. Confirm the worksite, the local tax label and any employer explanation. The state income tax worksheet does not determine whether a city-level payroll charge applies. Moving a worksite across a municipal boundary may change the local treatment while leaving the statewide calculation alone.

The local exclusion is especially relevant for people comparing a remote job with an office job in the metro area. A home address outside Denver does not by itself answer whether the employer’s work location triggers a local payroll item. Ask payroll which location is reported for the job. This article does not supply a city rate or calculate a local amount; use the employer’s location-specific documents for that part of the reconciliation.

Compare Colorado with four western and southern alternatives

The relocation table compares Colorado with Utah, Arizona, New Mexico and Georgia at $60,000, $100,000 and $150,000. Utah, Arizona and Georgia use different flat-rate structures in the site model, while New Mexico uses a progressive schedule. Their deductions and payroll programs are also different. Every amount comes from the site’s paycheck calculator with the same filing status and biweekly schedule, rather than extrapolating Colorado’s flat rate to another state.

The annual difference is Colorado net pay minus the comparison state’s net pay. The paycheck column converts that gap into a 26-check comparison. A positive result indicates more modeled take-home in Colorado; a negative result favors the alternative under the assumptions displayed. The table includes FAMLI for Colorado because it is part of the calculator. Local head taxes remain excluded, which can matter for a worker whose Colorado job is inside a municipality that levies one.

These figures isolate paycheck tax, not the cost of living. Housing, insurance, commuting and employer benefits vary by city and company. A lower state-tax estimate does not establish that a move leaves more money in a household budget. Use the calculator rows to compare the state-model component, then bring in the offer’s health premiums, retirement match and local expenses before deciding between salaries in different places.

Annual net-pay comparison: CO and selected relocation alternatives
SalaryCompared stateCO netOther state netAnnual differenceBiweekly difference
$60,000.00UT$47,728.00$47,720.00+$8.00+$0.31
$60,000.00AZ$47,728.00$49,292.50−$1,564.50−$60.18
$60,000.00NV$47,728.00$50,390.00−$2,662.00−$102.39
$60,000.00GA$47,728.00$48,144.50−$416.50−$16.02
$100,000.00UT$74,582.00$74,730.00−$148.00−$5.69
$100,000.00AZ$74,582.00$77,082.50−$2,500.50−$96.17
$100,000.00NV$74,582.00$79,180.00−$4,598.00−$176.84
$100,000.00GA$74,582.00$74,938.50−$356.50−$13.71
$150,000.00UT$106,773.00$107,116.00−$343.00−$13.20
$150,000.00AZ$106,773.00$110,443.50−$3,670.50−$141.18
$150,000.00NV$106,773.00$113,791.00−$7,018.00−$269.93
$150,000.00GA$106,773.00$107,054.50−$281.50−$10.83

Positive differences mean the displayed state leaves more modeled take-home pay at the same gross salary. All rows use single filing status and 26 checks.

Four hourly rates produce four annual tax bases

The hourly scenarios hold weekly work at 40 hours for 52 weeks. That converts $15, $20, $30 and $45 an hour into annual wages before calculating Colorado income tax and FAMLI. At $20 an hour, the assumed gross is $41,600.00. The state worksheet applies its allowance to annualized pay, and FAMLI follows covered wages. The two amounts therefore respond differently as the hourly rate moves through the table.

The $15 row is useful for seeing how much of an hourly worker’s pay the default allowance shields from state income tax. The $45 row shows a higher income level where the allowance matters less in percentage terms and FAMLI remains below the cap under the full-year assumption. At salaries above the FAMLI wage base, the program column stops increasing while the state and federal tax columns can continue to rise.

A part-time schedule changes the annual base and may alter the expected FAMLI total. Use the calculator’s hours and weeks inputs for seasonal work, unpaid breaks or a new hire who begins partway through the year. The displayed table is a steady-schedule reference, not a projection of variable shifts. Overtime and benefit deductions are not inferred from the hourly wage, so include those separately when comparing a real job’s deposit.

Hourly scenarios in CO, assuming 40 hours for 52 weeks
Hourly rateAnnual grossState taxState payroll programAnnual take-homeBiweekly take-home
$15.00$31,200.00$1,130.80$137.28$25,981.12$999.27
$20.00$41,600.00$1,588.40$183.04$33,834.16$1,301.31
$30.00$62,400.00$2,503.60$274.56$49,540.24$1,905.39
$45.00$93,600.00$3,876.40$411.84$70,389.36$2,707.28

Hourly rows use a steady full-year schedule; overtime, unpaid weeks and benefits are not included.

Use separate questions to audit a Colorado check

Start by comparing Colorado taxable wages with the annualized worksheet assumption. Then compare the state income-tax line with the 4.40% calculation after the default allowance. Next, check FAMLI against covered wages and its cap. This order makes a discrepancy easier to identify than treating all Colorado-related deductions as one percentage. If the state form uses a different allowance, the withholding line can differ while the formula described on the page remains the same.

A larger-than-expected gap may point to the local worksite charge or to a benefit item rather than state income tax. The calculator does not see insurance premiums, retirement contributions, garnishments or the municipal jurisdiction. Check the pay statement labels and employer records. An actual deposit includes more than the model’s state-and-federal tax categories, so a net mismatch alone does not diagnose which input or withholding line should change.

At year end, compare cumulative wages and cumulative contributions instead of multiplying one recent check by the number of pay periods. A worker can reach the FAMLI ceiling late in the year, and the employer’s period-level rounding can leave a small difference from a simple annual amount. The linked DR 1098 worksheet and FAMLI materials address the two state components separately. Use those sources for rule details and the calculator for a controlled salary estimate.

One Colorado raise changes two state calculations differently

Below the FAMLI ceiling, a $10,000 raise increases the program premium along with covered wages. The state income tax also rises, but it applies the worksheet rate after its allowance. The tax table lets a worker compare those two increases at several salary levels. Above the wage ceiling, FAMLI no longer rises with the next increment, while the flat state tax still responds to additional taxable wages under the modeled worksheet.

The distinction is visible when comparing a $150,000 salary with $250,000. The lower example remains beneath the Social Security wage base, so FAMLI continues to follow covered wages. The larger example exceeds it, making the program column level off. State tax does not share that limit. This is a Colorado-specific reason the state effective rate, total effective rate and FAMLI amount should all remain separate when reviewing an offer.

For a salary increase that takes effect partway through the year, compare cumulative wages instead of assuming the full new salary applied to all checks. The annual table treats each salary as if it were earned steadily for 52 weeks. Payroll reaches the program ceiling based on the actual covered wages recorded over the year, so the date of a raise affects which check reaches it. A changed employer or worksite can also introduce a local item not captured by the state table.

Colorado take-home by salary and hourly rate

SINGLE FILER · 2026

Salary and hourly examples use the same state model. Hourly figures assume 40 hours a week for 52 weeks.

Annual salary take-home
Annual salaryAnnual netBiweeklyWeekly
$30,000.00$25,075.00$964.42$482.21
$40,000.00$32,626.00$1,254.85$627.42
$50,000.00$40,177.00$1,545.27$772.63
$60,000.00$47,728.00$1,835.69$917.85
$75,000.00$58,204.50$2,238.63$1,119.32
$100,000.00$74,582.00$2,868.54$1,434.27
Hourly pay take-home
HourlyAnnual grossAnnual netBiweeklyWeekly
$15.00$31,200.00$25,981.12$999.27$499.64
$20.00$41,600.00$33,834.16$1,301.31$650.66
$25.00$52,000.00$41,687.20$1,603.35$801.68
$30.00$62,400.00$49,540.24$1,905.39$952.70
$40.00$83,200.00$63,576.32$2,445.24$1,222.62

Try the hourly paycheck calculator for a different work schedule.

Colorado paycheck questions

How much Colorado income tax does the model estimate on $75,000?

For single filing, it applies the 4.40% worksheet rate after the $5,500 default allowance; the calculator returns $3,058.00.

What does FAMLI take from a $75,000 salary?

The calculator calculates $330.00 under its 0.44% employee contribution and wage-base limit.

At what salary does Colorado FAMLI stop increasing?

The state model applies the contribution through the $184,500.00 Social Security wage base. At that cap, the modeled annual employee amount is $811.80.

Does this calculator include Denver’s occupational privilege tax?

No. Denver and some other local head taxes are excluded; check the worksite and employer records for a location-specific charge.

Why is Colorado’s effective rate below 4.40%?

The worksheet applies the rate after a $5,500 single-filer allowance, so effective state tax is measured against a larger gross amount.

How much is $20 an hour after taxes in Colorado?

At 40 hours per week for 52 weeks, $20 an hour is $41,600.00 gross. The hourly table calculates state tax, FAMLI and take-home from that annual amount.

Does an employer’s FAMLI share come out of my check?

The article and calculator show the employee-side contribution. An employer share is distinct from the employee deduction.

Sources

These are annualized estimates, not a pay stub or tax advice. Actual withholding can differ with payroll forms, benefits and year-to-date wages. See the site disclaimer.

Yassin

Yassin is a software developer who built PaystubLedger. As its editor, he checks each model against its linked source.

About Yassin

Keep reading